Counting matching models…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
This is the overhead locker from Borderlands 4! Use it to store all of your epic loot. The model features a spring assisted opening mechanism and holders for a hammer, craft knife, and tape measure. For assembly instructions, please watch…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
Removed usb bridge for more flexibility with controller header. Compatible with https://github.com/friction07/corne-xiao
Replacement battery cover for DumboRC DDF-350 Transmitter.
UPDATE: Please print the Updated stl file since some slicers have issues printing the top circle. :)
This part serves no purpose other than to make my Tronxy XY-2 Pro match the aesthetics of my Creality and like machines. I like to install similar upgrades on all my “like” machines for uniformity sake. Since my Tronxy XY-2 Pro is barely…
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
I have a lot of keys and always struggle to find the house key. Now the key to the kingdom is easy to grab. Plus you get to feel like king Arthur pulling the sword from the stone. Designed to be snug on a standard sized house key. Print…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
Hello. On Trx 2WD models (I got Bandit) the motor hangs out so uncovered, so I tried to model some cage or bumper to cover and protect it. I like how this turned out. Already tried bashing with it, sustained even a crash :O Its around…
Cover on camera ESO32-CAM + Development - programming board with console. Printed from PETG Accessories: ESP32-CAM Development - programming board ISO 14579 or DIN 912 - M3x16 - 3 pieces ISO 14579 or DIN 912 - M3x22 - 4 pieces DIN 934 -…
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
Cover for elBox - Bear Upgrade Prusa (i3) MK4S
For Weber Tire Changer Motorcycle Clamps (maybe others too) Inner diameter 82 x 61,5 mm
I made a simple bay cover to convert 5.25" bay to 3.5" for USB & SD card reader. Fits BeQuiet Silent Base 800 case. There are two versions - one has permanent snaps and the other one is glued on for strenght (recomended). Link to Amazon…
I wanted to light up my HomeCube with a white LED strip and turn it on and off using a small power switch from the outside of the HomeCube enclosure. Therefore, I modified the original base foot corner so that my switch fits perfectly…
I started with John 's Cable Cover for Prusa MK4/MK4S/MK3 model, but that did not work well for me. The extrusion rail cover segment was oversized (overhanged the edge), and that poor neuron that had finally achieved some reprieve over…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
Small mod to Samgo's terrific servo cover holder to fit the Corona 929MG servo
Mirror anti wind buffeting covers panels for Supra mkV. Printed with fuzzy texturing with low infill (10-15%) and using 3M double sided foam adhesive to install. Very easy to print. The file can be duplicated and flipped in the slicing…
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
A battery cover for Gameboy cartridges that have a rumble feature. These carts were notorious for the battery covers falling out. This design snaps in place securely by inserting the bottom two nubs into the notches on the cartridge, then…
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
I would recommend ABS or ASA, as the part is exposed to direct sunlight and therefore heat. layerheight: 0.2mm infill: 20% (gyroid) wall loops: 4 top shell layers: 5 (cause we need a little bit extra material for sanding)
Adjustable ventilation cap. I use it with a laser engraver to regulate suction. Diameter 60mm An M5 socket head bolt and nut are required for assembly
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
It's a cover for Renault Megane 2 obd2. Its also adds a usb charging port.
Tesa Power Kit-Adapter BK43-2 is a great product, so you can attach items on the tile, without drilling in it, and can hold up to 5 kg each, and can be easily removed. I've designed a simple cover, so the adapter can be hided, and used…
Protective cover for trailer 13 pins plug. Recomended print: Layers: 0.2 Perimeters: 4 Infill: 5% gyroid Material: recomended ABS, ASA, maybe PetG.
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
EN I designed this sliding cover so that the lights of the Vodafone ConnectBox (Compal CH7465) don't disturb my sleep. Preferably in dark filament so that no light gets through. When attaching it, press it down evenly so that no layer can…
VZBOT 235 AWD - CNC kit Back Motor Cover L/R side With screwdriver hole for disassembly Print from ABS, ASA, PC or PA (CF)
Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and that it fits the chassis.…
The Memory Pak stl available didn't seem to fit quite right, and was pretty low poly, so I rebuilt it from scratch in CAD. Step and Fusion source files available.
I thought this was applicable for those that already have this engine, and it worked out great!
Deckel für Netzteil mit leisen Lüftern Der Unterschied ist enorm, die Lüfter kaum noch hörbar. Umrüstung auf 12V Lüfter 1x Original Anycubic Netzteil Lüfter 1x AAbCooling Slim Silent Lüfter 80mm x 10mm (…
Helpful if you cut off the tip of your finger and don't want it to touch anything but still need to do things. A little awkward but beats bumping your finger into something constantly I guess. Not sure how 3d printed parts are with…
Printed with TPU filament, I used Easyprint. Temps as sugested by Easyprint. 190°C Nozzeltemp 40°C bed temp Layer height 0,15mm
Print with Supports. I used SunLu PETG 0.28 layer height 0.6 mm nozzle 90% extrusion factor (Klipper) getting the supports off the bottom was a bit difficult. I found lightly prying at all the edges makes the internal support come off in…
thanks to @irgendeintyp for providing the base model!
Here is a set of covers to plug the unused holes/ports behind the printer and make the print chamber a little more airtight. The model was designed to be printed in PP (Polypropylene) and designed to take into account a post-printing…
The cover must be printed with support material. It is recommended to use only ASA and a layer height of approx. 0.16 mm.
Three sets of tilings together with boxes for storing are presented: Set 1: Triangles, squares and hexagons, from which Euclidean tilings can be created. Many different tasks can be given to students: Create tilings with only one, exactly…
Loose-leaf binder cover for my kids to make their name on it. Cover is empty, name can be added in slicer. It's for sheets the size A4. Recommend letter height of 0.5mm. Print quality 0.16 optimal.
Protective cover for the Victron Energy BMV 500A shunt (e.g. as used in the BMV712). I have provided covers for cable side exit (as used in my own setup) as well as rear and front exit alternatives. Print Settings Rafts: Not needed…
Did you find yourself inheriting a door that previous owners had installed a cat door? Yeah…. me too. This is just a simple design to cover the 7" hole in the door. I didn't put too much time into it as I needed it pretty quickly in order…
UK Holder for IKEA STYRBAR. Model adapts the original to cover UK light switches completely. Uses existing hardware. Still gives access to light switch if needed. Printed with supports on Creality K1 Creality Hyper PLA white 0.16 layer…
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which you can drag into your slicer…
These are modified versions of the APX-24 parts to fit my pump kit.
Honda NT1100 Steering Wheel Nut Cover This steering wheel nut cover is designed for the Honda NT1100, created using PLA filament with a 15% infill and no supports required for printing. The design includes two variations: one with a logo…
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
If you like my work consider supporting me on boosty , thank you.
LCD screen and buttons cover for Leica M10 series cameras - V6 version Improvements over V5 model mount plate is completely covering base plate of Leica camera, providing extra protection but also more comfortable grip LCD cover plate has…
Print 2x same model with PETG Designed for: 0.25mm nozzle / 0.07mm layer OR 0.4mm nozzle / 0.1mm layer When using transparent PETG consult your Filament Specs
Modello stampato in 2 parti perchè interamente non entrava sul piatto di stampa della mia XL , consiglio di aumentare lo spessore della parte superiore x poi poter mettere dei connettori quando si effettua il taglio così l'accoppiamento…
Simple Milwaukee M12 battery cap that allows battery to stand up securely on bench and with finger grooves for handling.
After removing the original cover, the contacts on the switch are open at 230 V. If you lift the printer at the bottom, you can easily touch them. This is prevented by the cover. M3 hammer nuts for 20x20 profiles and M3x10 screws are also…
Snake Discovery baby snake hides for baby snakes to hide under and you can make it bigger for adult snakes. If you download it and like it give it a rating in the comments😊
I made this part because I wasn't satisfied with top lid opened all the way back resting only on hinges, which added pressure to material and there was a risk of damage. This part makes enough space for hot air to come out of the…
Object description: Remix of the original part “Wifi_module_cover_R1”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The…
Object description: Remix of the original part “el-box-cover_R4”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The NFC…
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
SUMMARY Are you a diehard fan of the Celtics, just love basketball, or like this clover design? Meet this fun awesome telescoping 9.2 cm × 9.4 cm × 2.0 cm clover that moves intricately with a hypnotizing design. With a fidget like this,…
the additional cover for the motherboard housing created when the motherboard is removed from the printer
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. The Santa hat fits firmly on the Lego ball hitch cover. It should be printed with fuzzy skin, outside only.
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. It has to be glued on the Lego head! It should be printed with fuzzy skin, outside only.
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
Just a Top Cover for @pwnate Tea Bag Dispenser to be able to use the area on top. Fits loose enough that you can lift it up from the exposed sides but is snug enough to no wooble arround to much.
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
Suggest printing out of PETG or other UV resistant filaments. Designed to fit nicely around 50x82mm button.
A cover to make the adapter protruding above the frame look better when using the 34.9 to 30.9 conversion adapter on the pole voima. I think it might work when using the adapter to convert from 34.9 to 31.6, but I haven't tried it.…
Couvercle pour véhicules miniature 1/43 Supprimer les couches supérieurs et inférieurs avec un remplissage en nid d'abeille pour obtenir la même finition Ajuster la hauteur si nécessaire Imprimé en PLA, 0,20, 10% de remplissage Cover for…
Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm
Uses a stanley tape holder clip and 6-32 nut and bolt. Printed with PETG. I did have to drill out hole bigger for screw and I pressed nut in with hammer
No ride is complete without a pair of fuzzy dice suspended from the rearview mirror. So when I made Mici's Artemis Lunar Rover for Dummy 13 , I had to add some. These dice of course could be used for other vehicles, or even on their own…
Customizable LED Color Filter for Dollarama Mini Battery-Powered Lights Description: Elevate your Dollarama mini battery-powered LED lights with this easy-to-use colour filter system! Designed to be compatible with the affordable white…
I decided that the clip on filter covers were a good spot to place a cheap hygrometer I had laying around. I am using it more as a chamber temperature sensor. There is a bottom or top mount for the cover. Cover should fit any of the…
Couvercle de protection pour Xbox limitant l'absorption de poussière. Une extension trouée permet d'empêcher l'appui accidentel sur le bouton d'allumage. Le trou permet de vérifier que la console n'a pas été allumée par erreur afin de…
Simple replacement 90mm fan cover for mini pc barebone cases.
I have a ratty old, but aways useful, imperial hex driver set but it’s missing the slip-on handle that is essential for the added torque often required. I was working in PETG and thought it would be the perfect material for a new handle!…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
Some Album Cover art for Green Days Dookie using 4 colors Please DM me if you want the hueforge files for editing (to change # of colors or something else) Project: DOOKIE HueForge.hfp Print at 100% infill with a layer height of 0.08mm…
i have a 2 year old that can reach and unlock my door, whilst i could set up an automation to stop this thats just annoying as then we cant leave the door unlocked when we want to. so i developed this (my first 3D model) a simple cover…
The three sizes cover varying amounts. From just the 4mm zip tie opening. To just that half of the base to the whole base.
