FrSky XM+ Holder with Antenna Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightweight case/holder for FrSky XM+ receiver featuring secure antenna strain relief and enlarged bind button
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The FrSky XM+ receiver has very fragile antennas that often get damaged if you don't handle them carefully. To fix this, I designed this case to hold the antenna wires in place and provide a good surface for gluing to the fuselage. I've also added an integrated button cap to make it easier to push the tiny button of the original microswitch.
To install, cut off the excess headers under the receiver's circuit board and integrated support under the case's button. Then slide the receiver into the case with the back part bent. Be careful not to damage the microswitch (yellow plastic can be sheared off). Bend the back of the case so that it snaps onto the receiver.
Also, check out my other RC related stuff. Fly safe and happy printing!