1 / 2
Simple handles for cabinets and kitchen
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kitchen and cabinet handles in various standard sizes, easy to print, support free.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 64
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Handles come in 5 different standard sizes (center to center):
❌ 96mm
✔ 128mm
✔ 160mm
✔ 192mm
❌ 320mm
✔ Tested - PLA | ❌ Not tested
TOOLS 🧰
- Philips* screwdriver (do NOT use a drill❗);
- 3.5 diameter wood screw (the length varies depending on the thickness of the door where the handle will be installed, keep in mind that the depth of the handle holes is 1cm, so choose the screw carefully);
- lighter or rather a torch lighter.
*you can use the screw drive style you prefer.
INSTRUCTIONS 🗒
I recommend heating the screw tip with a lighter before screwing; screwing the screw while still hot will melt the PLA and avoid breaking the handle, also ensuring a better seal.
TIPS 💡
if you remove the handle and decide to reuse it, I recommend you first melt some PLA inside the mounting holes as they will be wider and proceed with assembly as per instructions.