Greenhouse / incubator for herbs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple stand for illuminating herbs in winter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 314
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple stand for illuminating herbs in winter.
The stand consists of printed elements and a wooden shaft with a diameter of 28 mm.
What printed items do you need?
-Stand x2
-Top corner x2
-Bulb clamp (The quantity depends on the number of bulbs)
-Bulb cover (The quantity depends on the number of bulbs)
-Bulb holder (The quantity depends on the number of bulbs)
Settings:
-All elements printed from PETG material
-Infill 20%
-Layer 0.2
-Nozzle 0.4
-Support YES for TOP corner and bulb clamp
What do you need apart from printed elements?
-Wooden shaft with a diameter of 28mm (I used 2x40 cm for the posts and 50 cm for the crossbar)
-8x wood screws
-2x M3 nuts
-2x M3x30mm
-8x M3x10mm
-2x M3x16mm
Show off your implementation. Good luck.