Greenhouse / incubator for herbs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for illuminating herbs in winter.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple stand for illuminating herbs in winter.
The stand consists of printed elements and a wooden shaft with a diameter of 28 mm.
What printed items do you need?
-Stand x2
-Top corner x2
-Bulb clamp (The quantity depends on the number of bulbs)
-Bulb cover (The quantity depends on the number of bulbs)
-Bulb holder (The quantity depends on the number of bulbs)
Settings:
-All elements printed from PETG material
-Infill 20%
-Layer 0.2
-Nozzle 0.4
-Support YES for TOP corner and bulb clamp
What do you need apart from printed elements?
-Wooden shaft with a diameter of 28mm (I used 2x40 cm for the posts and 50 cm for the crossbar)
-8x wood screws
-2x M3 nuts
-2x M3x30mm
-8x M3x10mm
-2x M3x16mm
Show off your implementation. Good luck.