1 / 3
IKEA Trippevals blind flush mount with Klamby system — image 1
1 / 3

IKEA Trippevals blind flush mount with Klamby system

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement fitting for IKEA TRIPPEVALS blinds, works with KLAMBY components for flush mounting against windows

Rating
0 / 5
Likes
8
Downloads
58
Makes
0
Views
793
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement fitting for IKEA TRIPPEVALS blinds which allows them to sit flush with the window frame without the need for drilling. It is compatible with inward-opening and tilt windows. The print does not require supports and can be made with PLA, though higher temperature-resistant filaments are recommended if the windows are exposed to sunlight.

Required components

  • IKEA TRIPPEVALS blind
  • IKEA KLAMBY fittings (pack of two)

Installation instructions

  1. Remove the screw and mounting bracket from the KLAMBY fittings.
  2. Detach the transparent mounting clips from the TRIPPEVALS brackets.
  3. Insert the screw, mounting bracket and clips in the 3D print. 
  4. Install the two new fittings on each end of the TRIPPEVALS blind.
  5. Hang the blind with fittings over the window frame and tighten screws. Optionally, press the cap on the screw to hide the screw.

     

 

Tags