Mellow Fly DP5 Case for Ender 3 V2/Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a Mellow Fly DP5 MCU on Ender 3 V2 using stock mounting position. Allows for top access and dual cooling fans.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 82
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Working on a modified E3V2 with AWD Y axis and designed a case for the Mellow Fly DP5 MCU since it uses 5 stepper drivers and is a very cheap and accessible board. The case mounts in the stock orientation with the screws on the front plus some t-nuts on the back for extra rigidity. It will fit perfectly on a V2 or Pro since both use a 4040 extrusion for the Y axis, but it can still be mounted on a base Ender 3 (there will just be a bit of a gap. It also utilizes a combination of a 4010 blower and 4010 axial. The blower directs air specifically across whatever steppers you expect to have the highest load, which are X and Y, and the axial fan provides general cooling within the case. You can use the fans that come on the printer but I used GDSTime fans.
Parts:
| M3x6 BHCS/SHCS | 4 |
| M3x8 BHCS/SHCS | 6 |
| M3 T-Nut | 3 |
| M3x4x5 (4 length x 5 OD) heat set inserts | 3 |
| 4010 Axial 24v fan | 1 |
| 4010 Radial 24v Blower fan | 1 |
Note: I haven't done wiring yet and some minor adjustments were made to the design after my first version so it isn't exactly the same as the pictures. I may design another version in the future for use on a base Ender 3.