NodeMCU box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box was designed to contain a NodeMCU board and a breakout sensor boar. In my case I'm using a DS18b20 sensor to…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 86
- Makes
- 0
- Views
- 1,068
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This box was designed to contain a NodeMCU board and a breakout sensor boar. In my case I'm using a DS18b20 sensor to measure room temperature. There is a small space dedicated to the sensor to minimize the thermal effect due to the board heating.
Printed in 0.15mm layer height, 10% infill, with support for better results.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Yes
0.15
Infill:
10%
Notes:
Any resolution below 0.3mm can be used.
Support is not a must, but helps to achieve batter results
How I Designed This
Designed in Fusion360
Category: DIY