Hammer head (Hammerkopf)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a head for a wooden tool handle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 35
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Open Community License v1
Hammerhead for Wooden Tool Handle
The underlying wooden handle is the product number 31771908 from Bauhaus (see image). It’s 380mm in length and intended for a 1.5kg hammerhead.
Background Information:
My wife needs a hammer as a prop for her show dance performance on stage. We purchased an ash wood hammer handle from the local hardware store, for which I designed a hammerhead. The inscription reads “Hausordnung”, which is german for "House Rules." If you need a different inscription, please let me know.
Since it’s a dance prop that will be thrown around frequently, I included a screw hole that can be concealed with a cap. This way, the hammerhead won’t fly off even after extended and intense use.
Print Settings:
The hammerhead is designed to require only 10-15% lightning infill and no supports. I’m printing with 5 perimeters and extra perimeters on overhangs, as the prop will need to withstand a lot. You can reduce the perimeters to 2 without issue, though note that this will impact durability and robustness.
Last but not least:
Thank you for your downloads, likes, makes and your recommendations! These help me to make the models better known and thus reach more people.
A lot of effort and love goes into my models, which I make available to you free of charge. Since I have to print and test my models several times, I have costs for this. However, since I offer all my models for free, I am dependent on your support.
Your donation, no matter how small, helps me to develop new models and improve existing ones.
Thank you for your support!

--------- Hier die deutsche Originalbeschreibung:
Hammerkopf für Werkzeugstiel aus Holz.
Bei dem zu Grunde liegenden Holzstiel handelt es sich um die Artikelnummer 31771908 bei Bauhaus (siehe Bild). Er hat eine Länge von 380mm und ist für einen 1,5kg Hammerkopf gedacht.
Hintergrundinfos:
Meine Frau benötigt einen Hammer als Requisite für ihren Schautanz auf der Bühne. Wir haben einen Hammerstiel aus Eschenholz im lokalen Baumarkt gekauft, für den ich nun einen Hammerkopf entworfen habe. Die Inschrift lautet “Hausordung”. Wenn ihr eine andere Inschrift benötigt, lasst es mich gerne wissen.
Da es sich um eine Tanzrequisite handelt, die viel herumgeschleudert wird, habe ich ein Schraubenloch vorgesehen, das mit einer Kappe versteckt werden kann. So kann der Hammerkopf auch nach längerem und intensivem Gebrauch nicht weg fliegen.
Druckeinstellungen:
Der Hammerkopf ist so entworfen, dass er lediglich 10-15% Lightning-Infill und keine Supports benötigt. Ich drucke mit 5 Perimetern und zusätzlichen Perimetern bei Überhängen, da die Requisite einiges aushalten muss. Ihr könnt die Perimeter ohne Weiteres bis auf 2 reduzieren. Beachtet, dass hierdurch jedoch die Langlebigkeit und Robustheit leiden wird.
Zu guter Letzt:
Vielen Dank für eure Downloads, Likes, Makes und eure Weiterempfehlungen! Diese helfen mir die Modelle bekannter zu machen und somit mehr Leute zu erreichen.
Viel Mühe und Liebe stecken in meinen Modellen, die ich euch kostenlos zur Verfügung stelle. Da ich meine Modelle mehrmals anpassen und zum Test drucken muss, entstehen mir hierfür Kosten. Da ich alle meine Modelle aber kostenlos anbiete, bin ich auf Eure Unterstützung angewiesen.
Eure Spende, egal wie klein, hilft mir dabei, neue Modelle zu entwickeln und bestehende zu verbessern.
Vielen Dank für eure Unterstützung!
