1 / 5
Universal Print Sheet Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Symmetric wall mounting bracket to hold your spare Prusa print sheets. Prints fast and uses <15g of filament per pair.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 59
- Makes
- 2
- Views
- 457
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I designed this simple mounting bracket to hold Prusa print sheets, but it can be used to hold plenty else due to the mounting approach (no lock-in on sheet size). There are many other designs for this, but I found most to be quite inefficient with material (e.g. nearly 100g of filament—or 1/10th of a typical spool!) which also means they print slower. A pair of these brackets weigh in at just under 15 grams and print in 45 minutes with a 0.6mm nozzle.
- Slots for easier leveling/alignment
- Designed for ½" #6 wood screws, but any countersinking head screw of similar size will work
- 12mm deep recess can hold 5+ print sheets
- Print face down for best results