Ski Scraper Sharpener Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for a 100mm TOKO file to sharpen a plexiglas/acrylic ski wax scraper.
- Rating
- 4.2 / 5
- Likes
- 21
- Downloads
- 192
- Makes
- 3
- Views
- 1,188
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Housing for a 100mm TOKO file to sharpen a plexiglas/acrylic ski wax scraper. You will additionally need:
100mm TOKO (or other) file
5mm plexiglas/acrylic scraper
This design also works for 3mm scrapers. For a better fit you might want to shrink the model accordingly along that axis.
The fit for the file is a bit tight on purpose so it does not move around while sharpening the scraper. Depending on the quality of your overhang you might need a hammer to push it in.
Update 07.01.2025
Added STEP file
Update 14.01.2026
Added v2 Model based on Feedback
Improved tolerances to avoid having to pound the file in
Added a support plane to clamp or manually hold the housing