1 / 3
MK4 PSU Outside Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket to hold the MK4/S black PSU outside an enclosure with the Prusa PSU Cable Quick Release parts.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 1
- Views
- 419
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a version of an IKEA Lack enclosure and I wanted to mount the PSU outside the enclosure. This model was made for use with the PSU Cable Quick-release for Original Prusa Enclosure (MK4/S)
I printed the model with a 0.2mm quality layer height with a 15% infill.
Use two M3x12 screws with nuts plus the two M4x10r screws that were use to mount the PSU on the side.