1 / 1
BLLED Extended Plus Case with 24v Power Tap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BLLED Extended Plus Case
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 1
- Views
- 442
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Works with Bambu Lab X1, X1C, and P1P printers.
Uses two (2) Bambu Bus Cables.
Items Needed to Construct the BL LED with 24v Power Tap:
- BLLED Extended Plus for sale at dutchdeveloper (Etsy Store)
- Power Tap Kit and extra Bambu Bus Cable for sale at 3DMachinist (Etsy Store). Order the V1.3 version of the Power Tap.
Note:
Switch is 10x15mm SPST 2Pin
Barrel is Power Socket 5.5X2.1mm
Installation
Install on the back of the printer using the top two center screws using:
2x M3x22mm screw
BL LED Stand-Off is when you need to move the case further away from the back of the printer. Use M3x6mm screws to attach the stand-off to the printer. Stand-Off will give you an additional 20mm.
Specification
- Materials: Plastic, metal, printed circuit board
Recommendations
- Filament: PETG Gray
- Infill: 25%
- Support: Yes, Tree
- Brim: Auto
If you would like to buy me a cup of coffee.