Lenovo P340 Tiny 2L panels for low profile dual slot GPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop a dual slot low profile GPU into your Lenovo 340 Tiny or compatible computer.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 262
- Makes
- 0
- Views
- 2,206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to my first model! If you've got a P340 Tiny and want to upgrade the GPU to a dual slot low profile GPU this is the one for you. The specific model this was designed around is the MSI RTX 3050 LP OC since I've read it has the shortest length, and the fans have more blades so I figured it was the quietest of the bunch. Use a different brand and model GPU at your own risk.
There are vents all over to help control thermals, which feature isogrid and Voronoi patterns.

If your P340 Tiny is equipped with a Bluetooth antenna, it screws into the tab behind the front panel using the original screw, shown below (it's a tight fit, so it also has a depth clearance on the front face) :


The frame needs to be ever so slightly trimmed here so that the GPU can sit flat with its bracket. Though it's not reversible, the stock GPU bracket will cover it should you decide to revert back.

The GPU is held in with a heat set insert, M3 screw and washer

BOM
- 5x M3 heat set inserts (L4mm x D4.2mm)
- 1x M3x10 countersunk screw (on the right side of the top panel)
- 1x M3x6 screw (secure the GPU)
- 1x M3 washer (for the GPU screw)
- 6x M3x4 countersunk screws (about 4 or 5 of these are reused from your original screws)
- Your GPU and riser PCB
- BT antenna optional
Accuracy is crucial so at minimum I'd recommend printing one of the many 20mm calibration cubes to find your X, Y, Z axes shrinkage. PETG, ABS, ASA or similar are recommended. Use of PLA is not recommended. The fit is tight and the temps may warp your shell if the wrong filament is used.
Just like the other models, the usual disclaimers apply: This 3D model file is provided for personal use only. The design is intended for non-commercial purposes and should not be sold, redistributed, or used for any commercial activities. The creator of this file is not affiliated with or endorsed by Lenovo. All trademarks, copyrights, and brand names are the property of their respective owners.
The user assumes all responsibility for any use of this file, including but not limited to compliance with local laws and regulations. The creator does not guarantee the quality, performance, or safety of the printed object and shall not be liable for any damages arising from its use.
By downloading and using this file, you agree to these terms.