ESP32 Cam Case - HSW Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice neat case for your ESP32 Cam and dev board.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 158
- Makes
- 2
- Views
- 1,020
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This was based on the following ESP32Cam and Dev board and Antenna:
https://www.aliexpress.com/item/1005006299363624.html?spm=a2g0o.order_list.order_list_main.94.1b161802uMH60u
Case prints in two pieces front and back and are seated together. There are 3 holes for mounting the Antenna in various positions, there is a simple mount which holds the cam and you can screw into whatever you want to mount it onto.
I included some vents as I noticed in a ealier itteration it was getting a bit hot, this seems to have solved the issue.
- Example printed in PETG, with 25% infill.
- Front prints with no supports
- Rear may need some supports around the antenna holes.
- To make it fit neatly in the case wrap the antenna cable around the dev board headers as per below image:
Feedback is always appreciated, I do have a couple of alternative mounts I will add soon, including one to attached to HSW. Happy Printing.
Change Log
- EDIT 06/11/24* - Added HoneyComb Wall (HSW) Mount for the Cam Case - No Supports required