1 / 4
22mm Handlebar Mount for USB Charger Module (29mm Hole) — image 1
1 / 4

22mm Handlebar Mount for USB Charger Module (29mm Hole)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

22mm Handlebar mount for USB chargers to use with your ebike

Rating
0 / 5
Likes
6
Downloads
34
Makes
0
Views
191
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I reworked the geometry from my Ninebot max charger mount to fit a 22mm handlebar and mount horizontally. The main hole is sized at 29mm, make sure to check your charger before printing. Print in PETG for resistance to material creep (Do not use PLA). The charger comes close to the base to minimize length, you will have to solder to the terminals instead of using spade connectors. To mount the charger itself inside the housing, align everything upright to the mount side and use a thin screwdriver to tighten the ring nut.

 

Parts needed:

  • 2x M4 6x6mm Heat Set Inserts
  • 2x M4x18mm socket cap screws
  • 4x M2x6mm socket cap screws

Tags