1 / 2
Radiomaster Boxer Replacement Joysticks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacements for the uncomfortable aluminum joystick ends on the RadioMaster Boxer Radio transmitter. For Drone piloting
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 70
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement set of joysticks made for the RadioMaster Boxer radio transmitter.
It is recommended that you print from TPU (I used 95A because that's what I had).
I also would recommend inserting threaded inserts. It would probably be ok with out it, but they might spin around on the gimbal studs. I used the threaded inserts linked below.
I used the M4 x 10mm(H) insert. It has an outer diameter of 5.5mm.
Printed on a Bambu Labs P1P with eSUN TPU 95A (Gray).