1 / 14
Network Cable Drywall Passthrough
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Instructions:
- Drill a 20 mm hole through the wall
- Choose the "long" part according to the thickness of your wall
- Insert the "short" part on one side, and the long part on the other
- Fasten with a 3 mm wood screw that's long enough to reach the other part
- Push the cable/cables through.
Install the lid for one or two cables. You might want to bend the lid slightly while installing as the snap fit clips break easily Notes:
I've only used PETG for this, so I can't comment on the performance of other materials.
- Some cables have big connectors that might not fit through, see image
- I've managed to cram up to three cables through, but I don't have a lid for this.
Originally published here: https://www.thingiverse.com/thing:4572233
Category: Office