1 / 4
Subwoofer Neon LED swap for PIU DX — image 1
1 / 4

Subwoofer Neon LED swap for PIU DX

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

After breaking one of my neon tubes, I needed a way to replace them, and opted for look-alike LEDs

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is only checked to work on PIU DX cab subwoofers!! I've included the STEP and f3d files in hopes that if you wanted to make it work for another cab style, you should be able to modify it to do so.

To make it you will need:

Filament - preferably PETG or something else that's semi-flexible. My PLA test prints were unfortunately too brittle, so I'd discourage using it.

6 M3 flat head countersunk screws from Mcmaster, or equivalents: https://www.mcmaster.com/95893A191/

You will additionally need some LED Neon strip lights, which are easy to find on Amazon, aliexpress, etc… just look up LED Neon, and pick the color you like. You're looking for the ones that're around 5mm X 12mm in profile. I will link the ones I used, but amazon links rarely last, so do your own research: https://www.amazon.com/dp/B08SJCTTQP

Print one of each channel piece, and 3 of the pegs. The “kinked” ones will need support material. I regret designing them this way, and would encourage you to redo the model as a flat circle if you plan to do this yourself. Unfortunately I'm already done with what I needed this for, so my motivation to further modify the file has diminished. You've got the f3d and STEP - have at it! ;D

To wire them up, get yourself a DC solid state relay, wire up your new LED rings with an appropriate power adapter, tie the SSR enable pins to your amp's neon pins and the output to your LEDs' power supply. I used a spare brick I had sitting around, but you could probably grab 12v from about 8 places within the cab - knock yourself out and don't blame me if you blow it up.

For more information on how these LED strips work, I'd recommend checking out Big Clive on youtube. He's got several videos where he gets into detail on Faux-neon LED signage, including teardowns, circuit diagrams, and plesant British-accented anecdotes to boot. If that doesn't get you the info you need, feel free to message me on here or on Discord, and I'll do my best to get back to you!
 

 

Tags