1 / 2
Ceiling Canopy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Classic cone shaped canopy.
A M6x10 mm polyamid flat headless screw is needed to clamp the canopy to the cable.
To cut the thread I’ve been using a thread cutter or simply a new M6 screw.
PLA, 0.3 mm with variable layer heights.
Print upside down. No supports needed (you’ll have to remove the bridge).