1 / 4
Air75 Drone Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for Betafpv Air75.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 994
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
The case can carry four 1S 450 mAh batteries and Betafpv BT2.0 charger. I also installed inside a magnetic strip to attach prop removal tool.
Print with PLA or PETG. After printing the bottom part, four 5x5 mm magnets need to be inserted. Use glue to attach them firmly. Similarly, four more magnets need to be inserted into the lid. To do so, simply pause the print at 6.4 mm height.