1 / 3
Caliper Tray For Festool Multifunction Table MFT 3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Caliper Tray For Festool Multifunction Table MFT 3
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 80
- Makes
- 0
- Views
- 652
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Caliper Tray For Festool Multifunction Table MFT 3!
Hey all!
This is a Caliper Tool Tray Holder that was designed to work with Festool Multifunction Table MFT 3 and was designed using their STEP file available on the Festool page.
The tray is designed to perfectly fit and protect your precious caliper and keep it next to you at your work area at all times.
Caliper Tool Tray Holder was designed to use with Festool T-Nut and will need a 2xM5 screw and 2xM5 nut.
There are 3 main versions of the Festool Hanger:
- Caliper Tool Tray Holder with multicolor Festool Logo.
- Caliper Tool Tray Holder with embossed Festool Logo.
- PlainCaliper Tool Tray Holder with no logo.
Print Settings
- Material: PETG or above (ASA, ABS, PC) but will also work with PLA.
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2-3
- Infill: 15%
- Supports: None
Hardware needed:
- 2xM5 Screw.
- 2xM5 Nut.
- 2x Festool T-Nut.
Please think of voting for us at the Festool Competition.
If you print one, please share your results with us! and happy printing!
