Xshot Cluch spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Xshot Cluch spacer 150FPS to 170FPS
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 14
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
increases the HyperGel Cluch power from the original 150FPS to an estimated 170FPS.
step1: unscrew and remove the pump grip
step2: unscrew and remove the body cover
note: this is not the first time i have modded this blaster, and i am missing some parts because of a mod i did. when you take yours apart, you will have a few extra white parts above the piston assembly. you will need to remove them to install the spacer, and then you can put them back in or not. your choice.
step3: remove the white piston steadier
step4: put in the spacer as shown
step5: put it all back together
plz like and post a make! it encourages me to create more!
Print Settings
- Rafts:
No
- Resolution:
0.2mm
- Infill:
20%
- Filament material:
PLA