Desktop Stand for Shelly Wall Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Would you like a Shelly display for your desk, bedside table, workbench, sideboard or similar? Then I might have the rig
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 173
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This can be printed in two colors, but of course it doesn't have to be. To do this, the files Stand.stl and Strip.stl must be imported into the slicer as an object. Those who have a MultiColor printer will know how. For those who want to print in one color, use Stand-Unicolor.stl.
Two M3 hot-melt threads and M3 screws are required for assembly.
The cable must be inserted with a little feeling and pressure, the hole is designed to be quite narrow so that it is well fixed. Inside, I still recommend securing the cable with a small cable tie.
Please always be careful when assembling electronic components and/or have them assembled by a specialist.
As material, I recommend ABS, ASA or other materials suitable for electronics. However, I printed my desktop cases with PETG, which I personally consider safe enough. However, everyone is responsible for themselves, I do not take any responsibility!
This housing is not certified or officially tested.
If you would like to use or reproduce this electric housing commercially, please contact me to conclude a license agreement.
This can be used free of charge for private use. But I'm very looking forward to your donation: http://Ko-fi.com/beathoch
or: https://www.paypal.com/donate/?business=ABYSDSCV8PD4W&no_recurring=0¤cy_code=CHF
Have fun