desk trash can - side mounted, small, lightweight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple desk trash can to be mounted on the side of a desk.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 65
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A desk trash can made to use a small amount of filament while being functional and conserving space on the desk itself.
I recommend using the model with the built in support, as slicers may attempt to put supports in unnecessary places (e.g. the hex lattice or the top of the can. Models should all be printed as oriented. A mouse ear (or regular) brim is strongly recommended! Print speed should be slowed down to avoid knocking any of the delicate bits over.
The wall generator must be set to Arachne, or the line width set to less than 0.4. I would recommend always using Arachne, as many strange artifacts emerge when using the classic wall generator, even with a lower line width.
