1 / 3
Easy and quick Dry Box Connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy connector: quick print, fastened with the nut, press fit for 4 mm PTFE & cone for easily feeding filament.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An easy and quick coupler to connect a 4 mm PTFE tube to a dry box.
- The tube press fits into the coupler.
- The coupler has a conical opening to easily feed the filament.
- Hex nut and connector to easily tighten them
Printing instructions:
- Connector: PLA works well, in default settings
- Nut: Print in PETG for reduced binding (dissimilar material to PLA)
- No support needed
For drilling a hole in a Polyethylene/Polypropylene box:
- Hole diameter: 3/8 inch / 9.5 mm
- Drill a smaller pilot hole first
- Back up the wall against some wood to avoid cracking the wall when drilling the hole