OddityRC Toothpick dual battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds two 750mah 2s li-po batteries connected in series to get 4s voltage.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to mount two 2s batteries under the OddityRC toothpick drone frame.
Compatability: It has only been tested on the 5-inch version; however, it should fit the 4-inch version as well. Check dimensions for compatability with other frames.
Dimensions:
- 20x20mm mounting
- Holes for M2 screws
Hardware:
- 4x M2x12 screws
- 4x M2 nuts
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament / Print instructions : TPU - 100% infill, Print with Tree supports at an angle as shown in this picture:
Change Log:
Rev 01: Slightly thicker walls for more durability, flat surface on the side to glue an LED light onto.