PRUSA MK3.5 • MK3S/+ • MK2.5/+ Fan Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PRUSA MK3.5 • MK3S/+ • MK2.5/+ Fan Shroud
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 174
- Makes
- 0
- Views
- 1,007
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Engelsk:
PRUSA MK3.5 • MK3S/+ • MK2.5/+ Fan Shroud
I have modified this fan duct, which was made by RDH CS.
I have redesigned it to use the Prusa mount, making it easy to install. Additionally, I have incorporated a bracket so that the original Prusa fan for MK3S (5015 fan) fits perfectly and can be screwed into both holes.
It now fits MK3.5, MK3S/+, and MK2.5/+.
It provides optimal cooling for the 3D print, and it is printed in PETG. The print should simply be placed as shown in the photo. I have used Organic Support in the fan holes, where you only select the edge you want to include. See the photo for reference
Print Settings
- Layer: 0.20 mm
- Filament: PETG / ABS+
- Nozzle: 0.40 mm
- Infill: 15%
- Brim: No
- Support: Only for support enforces
Extra accessories:
- 2 x M3x20 mm bolts
- 2 x M3 nuts
Hilsen / bedst Regards
Leif Lumby Henriksen
Odense3D:
https://www.facebook.com/groups/2911561982402973
Dansk:
PRUSA MK3.5 • MK3S/+ • MK2.5/+ Fan Shroud
Jeg har redigeret denne fan duct, som er lavet af RDH CS.
Jeg har tegnet den om, så den bruger Prusa-ophæng, hvilket gør den nem at montere. Desuden har jeg indbygget et beslag, så Prusas originale blæser til MK3S (5015 fan) passer perfekt og kan skrues fast i begge huller.
Den passer nu til MK3.5, MK3S/+ og MK2.5/+.
Den giver optimal køling til 3D-printet, og den er printet i PETG. Printet skal blot placeres som vist på fotoet. Jeg har brugt Organic Support i fanehullerne, hvor man kun vælger den kant, man ønsker at have med. Se fotoet for reference.
Udskriftsindstillinger
- Layer: 0,20 mm
- Filament: PETG / ABS+
- Dyse (Nozzle): 0,40 mm
- Infill: 15%
- Brim: Nej
- Support: Kun for support enforces
Ekstra tilbehør:
- 2 x M3x20 mm bolt
- 2 x M3-møtrik
Hilsen / bedst Regards
Leif Lumby Henriksen
Odense3D:
https://www.facebook.com/groups/2911561982402973