Search results: rusa

Sort order

Counting matching models…

P
PrintablesPrusa Research

Prusa Face Shield

A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. On May 14 2020, this RC3 version received the CE certification and it complies with…

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
218,549
Likes
760
Rating
4.82
P
PrintablesNeedItMakeIt

Rod Sloth - Fits Most 3D Printers - PRUSA - BAMBU - CREALITY

This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40,929
Likes
8,958
Rating
4.92
P
Printablesdjedje_zr7

Side drawers for PRUSA MK3 I3

A side drawer for Mk3 I3 Edit 2021-01-29: Add the file for the left drawer. Edit 2021-02-01 : Addon to make it easier to assemble (nuts_helper_tool) Edit 2021-02-02 : Add No support drawers with 45° handle (files have 45d in name) Edit…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,014
Likes
2,283
Rating
4.95

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,587
Likes
437
Rating
4.74
P
PrintablesE3D

Prusa Mini+ Upgrade (Edition 2) Revo Micro

MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…

Print approx. €1.46–€1.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,203
Likes
762
Rating
4.91
P
PrintablesMax

Prusa mini side spool holder

I wanted a low profile side mounted spool holder that can be removed, other designs are attached with T nuts. Version 2 spool holder is closer towards x-axis (see pictures) Added a filament guide to spool adapter. Tall prints tends to…

Print approx. €10.09–€12.33 excl. taxPreliminary estimate for one variant

Downloads
3,876
Likes
646
Rating
4.92
P
PrintablesVertigoMakes

Prusa MMU2 PTFE Holder M10 Passthrough Adapter

Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…

Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,583
Likes
585
Rating
4.98
P
PrintablesMathieu

Prusa MINI/MINI+ Extruder Shield

Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,902
Likes
615
Rating
4.79
P
PrintablesYosuke

Extruder cable clip for Prusa i3 mk3s

This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,888
Likes
587
Rating
4.86
P
PrintablesOtter Mountain

Prusa Mini display backplate - Upgrade

Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
2,327
Likes
496
Rating
4.97
P
PrintablesTritschi

Tool Box for Prusa Tools (for adding upcoming Core One, XL or MK4S)

EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…

Print approx. €4.53–€5.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,889
Likes
786
Rating
5
P
PrintablesNils Kal

Prusa Spool Holder Wall Mount Bracket

Wanted to move the spool holder off my printer to reduce vibration so I designed this simple wall mount bracket. Installation is simple, drill holes and slide the inner piece onto the outer piece ("bottom" text should face down on inner…

Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,784
Likes
577
Rating
4.93

5 x 5 Grid Bed Level Test - Fits Prusa MK3

Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
1,782
Likes
48
Rating
4.93
P
PrintablesPrusament

PETG Carbon Fiber Prusament Clamp

The redesigned version of the original Prusament Clamp for PETG. This lighter version saves material but is still perfectly strong using PETG Carbon Fiber. The remix is designed by Josef Franc ( ropak ).

Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,748
Likes
343
Rating
4.88
P
PrintablesTronnic

Raspberry Pi 3 Case for Pi & Buck Converter - Direct Prusa i3 MK3 attachment

I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for one variant

Downloads
1,733
Likes
173
Rating
4.96
P
PrintablesReven

Pen plotter attachment for Prusa MK3s

This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…

Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant

Downloads
1,472
Likes
289
Rating
4.91
P
Printablesfasteddy

Prusa LACK Enclosure Cable Passthrough

These are larger versions of the cable passthrough tube used for mounting the power supply and/or LCD controller outside of the Prusa LACK Enclosure V2. _lack_cable passthrough provides enough room for the power cables as well as a USB…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,236
Likes
143
Rating
4.96
P
PrintablesPetclaud

Prusa MK3 Z axis vibration damper

This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3. The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
1,171
Likes
179
Rating
4.47
P
PrintablesPrusa Research

Prusa XL/CORE One L Knight Helmet

A fantasy knight helmet made in to showcase the print volume of the Prusa XL and CORE One L printers. Featured in the Prusa Academy XL and CORE One L Beginners' Courses. The helmet and visor are printed separately, together, including…

Print approx. €20.49–€25.05 excl. taxPreliminary estimate for one variant

Downloads
1,090
Likes
395
Rating
5
P
PrintablesIan Rich

Prusa Extruder Rotation Visualizer Turbine

All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,049
Likes
96
Rating
4.78
P
PrintablesCNC Kitchen

Prusa CORE One Magnetic Nozzle

Fits 20x5x2 mm or 20x6x2 mm magnets: https://geni.us/sWgcaKw (affiliate)

Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant

Downloads
914
Likes
462
Rating
4.84
P
PrintablesDom Cis

CONTAINERS - PRUSAMENT SPOOL - reuse idea

Follow the official blog post: https://www.prusaprinters.org/?p=8875&preview=true You can easily turn the paper centers into a handy container for accessories, pens, jewelry or even a money box! 3D printing is easy and quick, as well as…

Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant

Downloads
904
Likes
203
Rating
4.63
P
PrintablesTomasz P.

PaScn3D Mk.0 - 3D Scanner [PrusaPrinters Contest Edition]

Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
858
Likes
339
Rating
4.8
P
PrintablesMichal Fanta

Filament buffer for Original Prusa i3 Multi Material upgrade

This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
813
Likes
137
Rating
4
P
PrintablesDSpecter

.4mm Nozzle Bed Level + 1st Layer + XY Skew Test - Prusa Mini(+)

Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
675
Likes
35
Rating
5
P
Printablesbkerler

Prusa CORE One L (C1L) Nozzle Wiper

As I wasn't able to find any working nozzle wiper for Core One L due to design changes made, I had to redesign my own one :) Designing and testing took quite a while and DOESN'T break air ventilation opener, so I'd be happy if you leave a…

Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
666
Likes
287
Rating
4.96
P
PrintablesLV3D

Prusa Keychain

Keychain Prusa Research

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
580
Likes
77
Rating
4.95
P
Printableskenny93

Filamenttrichter / Filament Guide für Prusa Mini

Keine Stützen nötig, Infill fällt nicht ins Gewicht, Den Trichter einfach auf das Ende des PTFE-Schlauches stecken.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
573
Likes
130
Rating
4.94
P
Printableshedo

Prusa Mini Temptower for PLA, wait for temperature change before continuing the print

Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…

Print approx. €0.63–€0.76 excl. taxPreliminary estimate for one variant

Downloads
503
Likes
32
Rating
4.67
P
Printablesbreeden

Prusa Mini Spool Holder - sits on Z-Axis

This is a spoolholder that sits on top of the Mini's z-axis. Print the part using supports at 0.2mm layer height. You will need to disassemble one of your original Prusa Mini spool holders. This print replaces one side of your…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant

Downloads
489
Likes
92
Rating
4.86
P
PrintablesCarter

Prusa i3 Mk3 Power Supply Brace M3 and M4 Versions

Supports the Z and Y Axis when the Power Supply is removed... Usually done to protect the Power Supply from excessive heat. This helps provide structural support. 2 M3 Screws on Z axis frame, rear mount for M4 TSlot version. Front Mount…

Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant

Downloads
477
Likes
35
Rating
4.89
P
PrintablesDaniel Wyrwał

STACKED - Prusa Protective Face Shield - RC2

This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…

Print approx. €4.20–€5.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
442
Likes
1
Rating
0
P
PrintablesRaphy45

Articulated Night Spirit Dragon for Prusa Mini

Its a Updated Remix off the Articulated Night Spirit Dragon made for fitting the Original Prusa MINI (+) with a 0.15mm Structual setting and 75% scale compared to the Original. I recommend Prusament or for special effect the Bambu Lab PLA…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
440
Likes
22
Rating
0
P
PrintablesUko

Screw-top Containers (Prusament Spool Reuse Idea)

⚠️ A completely new version available ⚠️ see: https://www.prusaprinters.org/prints/27181-prusament-screw-top-container-v2 Dominik made very nice containers from Prusament spool cores. However, I didn't like that the top cover is…

Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant

Downloads
422
Likes
101
Rating
4.75
P
Printablesclivebradshaw

Prusa Mini Hotend Cable Stress Improvement

This is an excellent improvement to cable management by pekcitron Go to his webpage for description and pictures https://www.thingiverse.com/thing:4065410 Print instructions Printer: Prusa Model: Mk3S Rafts: No Supports: No Resolution:…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
417
Likes
76
Rating
5
P
PrintablesJAV3D

"Print in Place" Scalable Prusa-Box

english Description: Discover the convenience and versatility of our 3D-printed Print-in-Place Bento Box, offering an effortless printing experience and adaptable storage. Utilizing both lid halves, securely sealed by a precisely fitted…

Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant

Downloads
413
Likes
47
Rating
4.75
P
Printablesscubam@xx

T-nut M3 drop-in rotating for 30x30 Alu Extrusion (Prusa MK3/MK3S/MK3S+)

T-nut for 30x30 V-Slot aluminum extrusion like PRUSA MK3S (8 mm gap) compliant with M3 nut. I used them to install the Rubber Feet Support for Prusa MK3 by Volan on the PRUSA MK3S If you like it, plz post a make :) Print Settings Rafts:…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
374
Likes
78
Rating
5
P
PrintablesDSpecter

.6mm Nozzle Bed Level + 1st Layer + XY Skew Test - Prusa Mini(+)

Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
295
Likes
19
Rating
5
P
PrintablesCzech maker

Prusa Mini rear extruder part with filament sensor

Update 8/7/2022: Changed and reupload STL file of Prusa_Mini_Extruder_Rear_cover. Will try to update rest of the files (STEP, F3D) when I will have time. This remix of the Prusa mini extruder rear part with integrated filament sensor. You…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
265
Likes
96
Rating
4.5
P
Printablesinomad360

Prusament Spool Silica Gel Container and Hygrometer

I live in a very humid climate in Florida and need to make sure my expensive (but best quality) filament from Prusa is all dry and dehumidified. I have designed/remixed a solution to use rechargeable silica gel with a digital…

Print approx. €3.86–€4.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
258
Likes
32
Rating
5
P
Printablesdteng

Exhaust Fan Adapter for Original Prusa Enclosure

This was originally created to add the 80mm fan/filter assembly from 3DUpfitters (no affiliation) to the Original Prusa Enclosure, but it should also work for any 80mm fan. The adapter has three arms that attach to the metal enclosure…

Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
255
Likes
147
Rating
5
P
PrintablesJoFaTech

Nespresso capsules holder - Prusa MINI

Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…

Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant

Downloads
248
Likes
22
Rating
5
P
PrintablesRainer

Parts tray for Prusa Core One kit

For the assembly of my Prusa Core One kit, I constructed this tray to organise the parts for the next step. This way, nothing is forgotten to install. For easier removal of the small parts, all the compartments are generously rounded at…

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
247
Likes
68
Rating
5
P
PrintablesTomson Design

Prusa Snusdosa (Swedish Tobacco)

Prusa Research Snusdosa for Swedish Tobacco. Of course you can use it for other tobacco as well or even candy if you like. Printed with Verbatim Red/Black and Extrudr Military Green PETG 0,30mm 4 layers. 2023-01-13 Added clean top both…

Print approx. €1.39–€1.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
227
Likes
33
Rating
5
P
PrintablesJB

Catapult Card + 3 fast projectiles fits PrusaMini

Adam-M 's Catapult Card is realy great and the only missing peace are the right projectiles. So I resized the best flying projectiles from SteveJohnsen and put them into the Catapult Card. They are even flying faster know! One print,…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
207
Likes
17
Rating
5
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h per shield ! - 4x Stacked , easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…

Print approx. €10.92–€13.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
205
Likes
3
Rating
0
P
Printablesrbarnett

PRUSA 2.5 Infill Pattern Examples Plate

I needed a display for my lab of Prusa printers as I train people on how to print and wanted a good single sheet of examples of infills. There is no STL file as I built it completely in the Prusa Slicer with separate text files. GCODES…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
202
Likes
33
Rating
0
P
Printablesastrophage

XIAO ESP32s3 (Sense) Camera for Prusa XL

————Required Hardware———— Item Cost Seeed Studio XIAO ESP32 S3 Sense ~$24 IKEA Lillhult USB-A to USB-C Cable ~$5 Old Apple (iPhone) 5W USB power adapter ~$0 5 × M3-0.5x8mm Socket Cap Screws ~$4 I pick the Seeed Studio XIAO ESP32 S3 Sense…

Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
190
Likes
38
Rating
5
P
PrintablesBTR3D

C270 / C310 Camera Mount for Prusa Mini

The model files are not mine. However, I was able to assemble exactly what I wanted by combining files from different projects. For this reason, I wanted to collect and publish it for those who want to make a similar montage. You need: M5…

Print approx. €3.34–€4.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
177
Likes
53
Rating
4.5
P
PrintablesRainer

Nema rotation Indicator Extruder Prusa Mini

Allegedly, it should sometimes happen that the extruder of the Original Prusa Mini causes problems. It is therefore an advantage if you can observe the movement.

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
170
Likes
24
Rating
3
P
PrintablesPreppen

Prusa Mini, knob with splines

I made an IMO more elegant splines/knurled knob design. 25 mm diameter Printed at 0,10 mm LH and 15% infill.

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
28
Rating
5
P
PrintablesHarsesis

Rear Mount for Prusa XL Filament Sensor - Remix

When trying to use the original model from kez I faced the problem that my M3 nuts where to small for the internal openings. This caused them to spin, when I tried to tighten the screws. I created this remix with tighter tolerances to fix…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
51
Rating
5
P
PrintablesArea51

Prusa MK2.5/MK3 Filament Sensor Cover Upgrade

Sometimes the filament gets stuck when unloading - it can be difficult to get the stuck part out as you have to dismount the filament sensor cover. I made the cover two part, a fixed part and a screw in part, holding the PTFE guide tube.…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
156
Likes
16
Rating
5
P
PrintablesRainer

Nema rotation Indicator z axis Prusa Mini

Josef Prusa's tattoo as an indicator of the Z axis for the Original Prusa Mini Print instructions The print is black on both sides, so start with black when printing the Gcode printed. I used Prusament black / orange. Print settings Layer…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
46
Rating
5
P
Printablesclbears

Prusa i3 Mk3s+ Extruder Clip (for Palette 2, includes space for Rubber Grommet)

Use the same screw as before to attach this piece Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes, only on bed Resolution: 200 Infill: 20 Filament: Prusapolymers Petg Category: 3D Printer Accessories

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
147
Likes
9
Rating
5
P
PrintablesKeith B

Prusa Face Shield Stacked 3.2 remix - 8 piece 10hrs - no bottom - PETG

We are not using the bottom reinforcements. This Gcode starts with the Prusa provided Gcode for the Protective Face Shield 3.2, with the bottom reinforcements removed. Version 3.2 is stronger, no further changes are needed. See the…

Print approx. €13.74–€16.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
0
Rating
5
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h/shield ! - Stacked version, easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…

Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
144
Likes
3
Rating
0
P
PrintablesJakub

Prusa RC3 Low Material Face Shield Remix Stacked

I set this interesting model in the stack and made a few corrections acc. to Prusa stack: models are slightly more apart from each other to separate them without surprises supports go away easier a few extra places for adhesion Print 8…

Print approx. €14.12–€17.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
142
Likes
0
Rating
0
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
137
Likes
6
Rating
0
P
PrintablesBrainWorks

Pi4 Case for Prusa MK4 Base Frame Mount

Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
136
Likes
31
Rating
0
P

motor rotation indicator Prusa MK4/MK3

Weeeeeee. X axis motor indicator. :D

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
18
Rating
5
P
PrintablesCoronaSolved

Prusa Faceshield 0.8mm Stacked 4pcs/print - WORK IN PROGRESS!

We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…

Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
124
Likes
2
Rating
0
P
PrintablesGusi

Original Prusa Enclosure top-plug-center Passtrough with Magnets

I wanted to ensure a completely closed path from my Drybox into my Enlosure and to the Printer. To be easily able to open the bowden without effort I decided to go for the…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
27
Rating
0
P
PrintablesHarashi

Kanagawa Wavepattern coaster Multicolor prusa xl 5 heads/2 heads

Printed with 5x PLA. If you want to use it with less heads take the .3mf file and change it to your liking. Print time is very short on the Prusa XL (<90 min).

Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant

Downloads
112
Likes
46
Rating
5

LM10LUU SuperLube adapter remix (for Prusa Mini Z bearings)

Took the existing LM10UU adapter into Blender and extended the open area by 26mm.

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
14
Rating
5
P
PrintablesGizzo82

Arducam HDMI for Prusa Enclosure

I created a CSI/HDMI adapter port for my Prusa enclosure and a Raspberry Pi camera Print instructions printed with PET and 0.15mm layer height

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
101
Likes
5
Rating
0
P
PrintablesMtechnic

Prusa MK4 Z-Bottom Motor Hole Dust Caps / Covers

Worried that filament might find it's way into the Z-Bottom motor mount screw holes? Here's your solution! I've made a couple versions of the caps and provided bother .STL's. V2 = looser fit; easier to remove V3 = tighter/snug fit; not as…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
18
Rating
5
P
PrintablesDSpecter

.25mm Nozzle Bed Level + 1st Layer + XY Skew Test - Prusa Mini(+)

Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
11
Rating
0
P
PrintablesOurAngryBadger

Nozzle Cam for Prusa MK3s / Bear Exxa

I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
86
Likes
50
Rating
0
P
Printablesgybalazs

Prusa Box Enclosure - HEPA & Carbon filter cover for Noctua industrial fan

This cover is based on a newer version of the HEPA filter: https://help.printer-box.com/home/download/#elf_l1_UHJ1c2EtYm94L01vZHMvMDA1X0hFUEEtQ2FyYm9uIF9maWx0ZXI (the one on Printables is the old version) The height of the cover and the…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
83
Likes
34
Rating
4.5
P
PrintablesJacopo Tediosi

Original Prusa Enclosure (OPE) - PSU Cables Hole Fill (Cover / Plug)

This is a cover that fills the hole for the power supply cables. It is useful for keeping heat and stink inside the Prusa Original Enclosure, especially for those who use the PSU Cable Quick Release addon. I designed this project in a…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
23
Rating
4.33
P
PrintablesHerGiz

Prusa Mini Frankenstein Spool Holder

This is mashup of 2 designs. My problem is depth of a printer. If a spool would be in front of a printer, my kid would sooner or later knock it of. So I was in search of other solutions. @ Taer.Holmes was on a right track, but I didn't…

Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
20
Rating
0
P
PrintablesTuna Celik

Phone Stand/Holder For Octa4a / Prusa i3 MK3S+

An adjustable side mount for the Samsung Galaxy S4. It helps you to hold the phone that is running Octo4A. You can track the process with the cam or create a timelapse of your print. I specially made the design for Samsung Galaxy S4 but I…

Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
14
Rating
5
P
PrintablesHades

držák kamery Buddy 3D, Prusa XL, holder

model je z PETG, vrstva 0.20mm tisknuto na MK4S použíte 2x šroub ze sady nahradních dílu 2x zápustná matka do plastu M3 2x zastrčná matka do extruze rámu je možné upravit ve Sliceru otvory pro šrouby na menší průměr, pak se nechají použít…

Print approx. €1.47–€1.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
10
Rating
5
P
PrintablesRainer

Prusa Core One Protect / Now with Mulicolor without MMU

I noticed on my Core one that you can already see it on the inside wall where you often touch it with the sheet, which unfortunately cannot be avoided. That's why I designed this protective cover, which can be easily attached with…

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
63
Likes
15
Rating
5
P
PrintablesJeroen3

Prusa Enclosure top filament feedtrough

Simple feedthrough that optionally fits a M6 pneufit for ptfe tube. Does not require additional fasteners, clip-on.

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
13
Rating
5
P
Printableselectrodraco

Customizable Filament Card Swatch for PrusaSlicer

I was unable to customize matez' filament swatch because my personal license of Autodesk Fusion does not allow me to open or import Autodesk Inventor files. Instead I removed all text elements from the provided STL file and placed…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
5
Rating
5
P
PrintablesTperroneDesign

Prusament Spool Wind Chime

Prusament Spool Wind Chime: I thought it would be cool to make a Prusament Spool Wind Chime. It works really well for both contests. I used the Prusa Dummy Spool to make this model. I plan on doing some testing on the tubes to hear the…

Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
39
Rating
0
P
PrintablesArash68

Bookmark Prusa / Marque-page Prusa

EN : A bookmark with the effigy of one of the symbols representing the brand FR : Un marque-page à l'effigie d'un des symboles représentant la marque

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
10
Rating
5
P
PrintablesCharcoal3928

Stanley Quencher Can Holder – Prusa Edition

Description A clean and functional remix of the iconic Stanley Quencher, reimagined as a 3D-printed can holder for summer BBQs, cold drinks, and Prusa enthusiasts. This design replaces the original lid with a custom insert that fits a…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
24
Rating
5
P
Printablesfrasier2k

LED Light Bar Prusa i3 MK2/MK3 for 7x14mm extrusion

This Remix based on SethBon's LED Light Bar. I changed only the dimensions for the alu extrusion to 7x14mm.

Print approx. €6.60–€8.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
11
Rating
5
P
PrintablesNiyam101

Water Defracting RGB Hinged Room Lighting - Prusa Edition

INTRODUCTION Hello everyone! Firstly, before talking about my entry, I would like to thank Prusa for hosting this competition. It has been extremely fun and improved my CAD skills a lot. This is my second revision of the room lighting I…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
31
Rating
0
P
PrintablesFuntomaas

3D Scanner PaScn3D Mk.0: Remix adapted for Prusa Mini+

I like Tomasz' original Version for the Prusa I3 MK3, but I own a smaller Prusa Mini+, so I changed some things. When I started I wasn't quite familiar with FreeCAD and Prusa-Slicer, so I had some learnings and of course I would make it…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
19
Rating
0
P
PrintablesPoke2

Blumentopf mit Prusa Fuzzy Oberfläche / Simple flower pot with Prusa Slicer Fuzzy Skin

Einfacher Blumentopf mit Wasserablauf und mit Prusa Slicer Fuzzy Skin Feature auf den Aussenwänden. Ich habe das ganze mit einer 0,8 Nozzle mit Prusa Terrakotta Light PETG gedruckt. Kein Support oder Rand notwendig. Ich habs auch für eine…

Print approx. €5.34–€6.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
10
Rating
0
P
PrintablesContact2406

BallBearing spool holder for (Un)orginal Prusa Drybox with counterbored

The mount holes are for original 18mm, bars. Needs: Print 2 x walls by spool Buy 4 x ball bearings 608 Reuse 2 screws M3x10 (Warning: this is not a bone for dogs ;-) )

Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
3
Rating
5
P
PrintablesEDO

PrusaMini steelsheetholder x3

made it easier to take out by shifting the sheet a little. It is recommended to fix it with double-sided tape.

Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
17
Rating
5
P
PrintablesKnoxyboy

Prusa MK4 MMU3 Tidy Cable Clamps (New Honeycomb Frame) Part B 12mm, 16mm & 18mm

I had some spare M3x18 screws from the MK4 kit and MMU3 kit, so instead of buying new screws I remixed the height of part b. Printed in eSun black PETG. Edit 08.06.2024: Added part b remixes for M3x12mm and M3x16mm screws. These lengths…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
8
Rating
5

Prusa Encolsure Magnetic Foot

This is a magnetic center foot for the Prusa Enclosure. For use with 8mm X 3mm Magnets.

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
3
Rating
4

Prusa CORE One Heatbed Cable Entry Cover with Input Shaper Accelerometer Cable Support

This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
18
Rating
0
P
Printableskilldaclick

Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure

Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure The camera can be mounted on the right side of the Prusa Enclosure using the original camera mount holes. Simply place the camera on the mount and rotate it clockwise. This…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
9
Rating
4
P
PrintablesMacbambi

175mm Ständer für Töpfe - Sauberer Boden - Prusa Mini geeignet

Ein Untersetzer für Blumentöpfe im Garten. Kein Schmutz und Ungeziefer mehr unter den Töpfen, alles bleibt sauber. Die Luft kann frei zirkulieren.

Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
6
Rating
5
P
PrintablesKoffeekooker

Prusa MMU3 or ERCF universal buffer, takes 900mm filament, mounts on IKEA Skadis or stand, USS compatible

Welcome, you MMU3 or ERCF users. I was kind of fed up with the spools standing around my Core One with MMU3 (former MK4S) so I installed 2 IKEA Skadis boards behind the printer to mount the spools. However, the Prusa buffer used a lot of…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
7
Rating
0
P
Printablescsweichel

Honeycomb Rail for the Original PRUSA Enclsoure (OPE)

This is a set of honeycomb plates for the lower right edge of the Original PRUSA Enclosure. Prints on one plate.

Print approx. €4.20–€5.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
9
Rating
0
P
PrintablesAnthem212

PrusaBox, PrinterBox, Aktivkohlefilter / CarbonFilter, ActiveCoalFilter, Airfilter, Filter

UPDATE 02.03.2023 Da mir langweilig war habe ich den Luftdurchsatz verbessert indem ich oben noch einen 80mm “Pull”-Lüfter angebracht habe. Die Konstruktion ist etwas komplexer geworden da bei mir auf der Prusabox noch die Filamentboxen…

Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
5
Rating
3
P
PrintablesOeschMe

Timelapse trigger holder for Prusa Mini+

Timelapse trigger holder for d3v-163-1c5 microswitch. I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below). Print clip side down, as show in print bed image. Clips can…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
11
Rating
5
P
PrintablesREMLURELMI

Remix - Prusa Enclosure PSU Holder Wire Pass Through Plug

Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Add a zip tie to both sides, after passing the PSU wiring through the hole:…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
8
Rating
0
P
PrintablesA. Schoonen

Original Prusa Enclosure Steelsheetholder with mounting letters

A simple remix of the steel sheet holder by Waldmops but with letters embossed above the mounting holes.

Print approx. €6.09–€7.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
2
Rating
0
P
PrintablesOgre Ray

#0072 [Remix] Prusa Enclosure Top Center Plug - PTFE Tube Gripper (Holder) X1

PRUSA Enclosure Top Center Plug with 1 hole for PTFE Tube Gripper. Loved BuildX's remix- but I don't have a MMU... So I used Prusa Slicer's “Add slab” to plug 4 holes, and “remove slab” to cut out the 4 stems….. thereby reduced down to 1…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
4
Rating
0
P
PrintablesLuis

Prusa i3 MK3S+ LCD Plate for Lack enclosure / Montageplatte für LCD Bildschirm Prusa i3 MK3S+ Gehäuse

I had the Idea of removing the LCD screen from inside of my enclosure and attaching it to the Lack table. So I designed this plate to hold it. You need four M3x18 screws, wich you can take from the spare parts of your Prusa Printer. The…

Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
4
Rating
5
P
PrintablesMartin92x

Prusa Mini+ - MoveZToTopPosition G-Code

USE IT ON YOUR OWN RISK Description: Short G-Code file to move the axis automaticly into a safe pos Automatic Steps: Home all without mesh bed level Move Z axis to 160 Move X-Y axis to 90 turn off temp, heatbed, fan disable motors Modify…

Print approx. €0.04–€0.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
4
Rating
0