Prusament Spool Wind Chime
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.93 – €1.13 net (excluding VAT)
For file: Spool_Chime_Mount_Upper_0.3mm_PLA_MK3S_1h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.03 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusament Spool Wind Chime
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 58
- Makes
- 0
- Views
- 561
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Prusament Spool Wind Chime:
I thought it would be cool to make a Prusament Spool Wind Chime. It works really well for both contests. I used the Prusa Dummy Spool to make this model. I plan on doing some testing on the tubes to hear the sounds they produce.
The hardware used is 6 M3x12 Fasteners and 6 M3 Hex Nuts for the Mount. String to hang the tubes about 1.5" below the spool or alternating heights. Tie the knots so that they end up inside the tubes so they are not visible. String for the Striker and the Pendant that attaches to the bottom of the Hook, about 12" plus some extra for the knots. Tie knots to hold the Striker in place
Share a picture if you print one!