The Bambu Lab Poop Chute V2 (Enclosed)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.37 – €7.79 net (excluding VAT)
For file: BambuLabPoopChuteV2-BrunoSerge.com (1).gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.08 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 7.08 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bambu Lab poop chute collector bucket (X1C P1P P1S AMS), fully enclosed for heat containment
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 98
- Makes
- 1
- Views
- 855
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — NoDerivatives
So many downloads - not as many likes! If you find this useful please Like it and subscribe to my Printables profile! Please also consider donating.
V2 of Bambu Lab poop chute collector bucket with enclosed walls to keep heat in the print chamber.
Improved design that
Prints faster, uses less plastic
Completely encloses the printer's chute opening for heat retention in the chamber
Conveniently snaps into place with a lip that fits the chute for tactile feedback
It can stand by the printer on its surface, or be attached with magnets (recommended)
Uses 16x 6x2mm magnets https://amzn.to/4jbwsft held in place with cyanoacrylate (CA) glue https://amzn.to/40rQg5L . Each cylindrical slot is sized for a stack of two 6x2mm magnets.
Check V1 https://www.printables.com/model/1143321-bambu-lab-poop-chute-v1-ventilated for open non-ventilated chute (maybe useful for PLA where enclosure ventilation is preferred, but overall this V2 is better in every way, as you should just keep the glass door and/or top open if ventilation is desired).