Prusa XL Pegboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard that mounts to the side of the Prusa XL using the Sumo Enclosure mount points.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 18
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I wanted a better way to store all my 3D printing tool and keep the readily accessible so I designed a pegboard that mounts to the side of my Prusa XL that has the Sumo Enclosure installed. The pegboard is printed with 0.25 structural profile, 15% infill, and no supports in 4 pieces. The 4 pieces are secured to each other using 4 m4x20 screws and nuts. Then you use 6 m5x16 bolts to secure the pegboard to the Sumo Enclosure's mount points.
The pegboard uses the standard 1" spacing and .25" hole diameter so it is compatible with most hangers. I don't know how well this will work with the filament side mounts as I use dry boxes for my filaments. If you up the infill percentage I can see you being able to mount a 2kg spool to the pegboard.
This pegboard can also be used on the Prusa XL without the Sumo Enclosure using the top and bottom aluminum rails with t-nuts.