PolyDryer / SnapDryer: make its colors match your setup! (Reprinted plastic parts)

INTRODUCTION:

I love the idea of PolyDryer/SnapDryer but not the standard blue color so I redesigned every plastic parts so I can make my own in the color I wanted.

 XL VERSION HERE : 

OPTIONS:

I offer 2 options for attaching the lid clips:

• M5x12 hinge you can screw to have a very robust part (left on the picture)

• Printed hinge (right on the picture)

If you choose the part with printed hinges, you will have to use supports on the studs.

I also provided multi colored PRUSA RESEARCH files for the clip in both variants.

HARDWARE needed:

If you choose the clip with screws, you will need:

• 4x M5*12 screws

CONTENT:

The files you can download will allow you to reprint every blue plastic pieces of the PolyDryer.

For the feet, you will have to reuse rubber seals and feet.

Plastic window and hygrometer on dessicant basket fit perfectly.

I also added a dessicant basket with more holes:

PRINTING SETTINGS:

I recommend printing dessicant basket with organic supports manually placed on the small chamfer below the bridging part:

Here are the support parameters I also recommend:

You should have something like this:

COMMENTS:

Use the right material! Use the higher material you used to dry! :)

I hope you will like it and I hope to see crazy PolyDryer/SnapDryer variants! :D