1 / 4
Needle Nose Pliers Cover - DeWalt DWHT70799 — image 1
1 / 4

Needle Nose Pliers Cover - DeWalt DWHT70799

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A cover, designed for the DeWalt DWHT70799, that slides onto needle nose pliers to protect them.

Rating
5 / 5
Likes
10
Downloads
60
Makes
3
Views
192
Reviews
4

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

This is a cover that slides onto a pair of needle nose pliers to keep them from damaging surfaces and from injuring you.

This design was specifically made for the DeWalt DWHT70799 pliers. These pliers have been discontinued, but these are the pliers I have and I wanted to post this model so others who have the same model can use my design. They may very well work on other pairs of pliers, so I have provided the dimensions of my pliers so you can measure yours and see if this cover will work.

Approximate pliers dimensions (of the part that is covered by my design in the provided pictures):

  • Length (from top to bottom): 72 mm
  • Width (across the handle): 18 mm
  • Width (perpendicular to the handle): 9 mm

Printing

I have provided two different files for different filament types; if you use a hard filament like PLA, PETG, or ABS, print the “Normal” version, and if you use TPU, print the “Flexible” version. The flexible version has a smaller tolerance, allowing it to slide onto the pliers without needing a snapping mechanism.

I printed my versions with Inland Translucent Red 95A TPU and Inland Orange PETG+.

License

This is shared under the CC BY 4.0 license, meaning you can share, adapt, and sell copies of this design as long as you give proper attribution. This requires you to include the name of the creator (Soundwave3D), a license notice, a link to the original material, and, optionally, the title.

Example

“Needle Nose Pliers Cover - DeWalt DWHT70799” (www.printables.com/model/1154322-needle-nose-pliers-cover-dewalt-dwht70799) is designed by Ethan Bayer and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).

Tags