Filament Rack Bracket w/Endcaps

This is a load tested bracket, I simulated a much higher load than filament would ever exert, my personal setup holds up to 13 rolls of 1Kg filament rolls, with the addition of more brackets it can be extended , The diameter of the rod fixture is 25.5mm , so it can be used with thinner rods and up to 26mm rods, I used an old rod from a Microphone boom arm for my rod, a broom handles may work or a wooden dowel rod, anything that doesn't bend easily. Load tested in simulation up to 29.3Kg, the screws will fail before the bracket, YMMV I assume no responsibility if your brackets fail at 26Kg or something lower