Magnetic Barrina T5 Grow Light Mount Clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips for the Barrina T5 Grow lights with embedded 10mm magnets
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 97
- Makes
- 1
- Views
- 607
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Simple clip for a barrina grow light that uses 10x3mm magnets to mount onto a metal surface.
I used these magnets from amazon (no ref code), and they measured 10mm x 2.65mm actual, so I modeled it with a 10.2x2.7mm hole in the model. With a 0.20mm layer height, it means that I set a pause after layer 88, which allows me to insert the magnets and resume the print. (included gcode for my prusa mk4s)
STEP files included to allow for easier remixing/changing.
This is a tight fit on the lights, which is intentional as it allows it to be used in multiple orientations without sliding on the light.
As a result, PETG is a preferred filament due to the heat resistance, along with the slight flex when clipping it onto the light.
Print settings
Prusa Mk4s
0.4mm CHT nozzle
PETG Black
2 magnets 10x3mm
Brim (to keep the part from getting knocked over when inserting the magnet)