Turn table easy to make
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print and easy to make.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v3.0
Print with PLA no supports needed at 0.2 layer height.
Arduino code:
//DIJKX
#include <Servo.h> // servo library
Servo s1;
void setup()
{
s1.attach(0); // servo attach D3 pin of arduino
}
void loop()
{
s1.write(77); // 90 stops servo above 90 rotate other side, controls the rotation speed.
}
connections:
You need an external powersupply of 5volt 2A. The servo is rated for 1.7A not a good idea to power it from the ESP board.
Groundwire to G of Arduino and brown/black wire of servo
Plus 5 volts to 5volt Arduino and red wire of servo
Pin 3 of Arduino connects to yellow wire of servo
Thats all
Servo MG966R 360 rotation servo. Don't buy 180 servo
ESP 8266 board
For programming the esp8266, a micro usb cable to usb A cable and Arduino IDE (free software)