Filament Refill Spools
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.62 – €4.42 net (excluding VAT)
For file: Refill Spool 82 Side B.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.02 excluding VAT (range midpoint).
- Weight reported by the author
- 83 g
- Print time reported by the author
- 2.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Filament refill spools with various diameters
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What this is
These are refill spools with various midsection diameters. One side of each version has a 30mm x 60mm rectangle to stick the filament label to.
(Print data of this model and render in gallery shows the ⌀82mm version)
General dimensions
Total ⌀: 205mm
Wall thickness: 3mm
Center thickness: 60mm
Total thickness: 66mm
Versions
⌀82mm (81.5mm) → Not tested yet, Should fit “The Filament ReFill” and “Bambu Lab” refill rolls. Has a 5mm wall to hide the cardboard roll.
⌀90mm (89.5mm) → Tested with “Purefil” refill rolls.
This spool might be about 2 to 3mm too wide and filament might get stuck on the side!
Will be Fixed soon! Cut the top of both Sides by at least 2mm to fix this temporairly.
Print section
No supports or rafts required.
Use any infill amount you want. I recommend at least 15 to 20%.
Coming soon Planned but no time to add
Remaining filament amount display (MMU/AMS required)
Built-In Filament holder or clip (not sure yet)
More versions → Contact me if you wish for a specific diameter