Magnetic corners
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.41 – €0.50 net (excluding VAT)
For file: Magnetic Corners PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this for my printer enclosure- wood body with acrylic door. The magnet corners keep the door closed
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 44
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Use 8mm Diameter x 3mm Height disk magnet. Thickness of acrylic door will regulate magnet pull- thicker acrylic will have less magnetic pull to keep the door closed. If there is no gap between magnets opening door will be a nightmare. So install with acrylic door between magnets. See image. I rounded the corners on the door side- the photo shows the original design. Corner 1 uses 2mm wood screw with 4mm head. Corner 2 uses m3 screws with locking nut