1 / 2
Quadmula Siren F3 and F35 Antenna Mount for DJI O4 Pro Air Unit — image 1
1 / 2

Quadmula Siren F3 and F35 Antenna Mount for DJI O4 Pro Air Unit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounts both O4 Pro Antennas for a Quadmula Siren F3 and F35. Print with TPU. Recommended settings below.

Rating
5 / 5
Likes
8
Downloads
160
Makes
0
Views
607
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

Here are O4 Pro mounts for the Quadmula Siren F3 and F35. I like running the XT30/XT60 over VTX and out the top/back of quad, so I made the U shape mount to give some clearance for that. There is a version for T-shaped receiver antennas as well (like ELRS).

The U-shaped mount can be difficult to get clean print around the base where antennas meet. I've learned laying it down with antenna facing up, resting along the standoffs (as the STL is laid out), gives it best quality. I recommend doing 2-3 raft layers to make the bottom of standoff mounts print clean. Support (tree/organic) recommended to improve standoff holes and underside of mount. ELRS mount I wouldn't do without supports.

 

This is what I've been running for clean prints.

Layer height: .18mm with .30 initial layer

Infill: 70-100%

Support: Organic/Tree style w/ Support/Object XY Distance of 0.15mm

Raft Layers (recommended): 3 layers w/ 0.1mm Raft Contact Z Distance

 

Tags