Ducati Monster 696 Rear Light Mount Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pair of custom brackets for mounting the rear light on a Ducati Monster 696 after replacing the original plate holder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ducati Monster 696 Rear Light Mount Brackets
A pair of custom brackets for mounting the rear light on a Ducati Monster 696 after replacing the original license-plate holder.
Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design
I designed these brackets after the original rear license-plate and light support failed and I replaced the plate holder with a separate metal part. The printed brackets give the original rear light a new mounting position under the seat area.
Key details
Pair of mounting brackets
Mounting hole diameter: 3.9 mm
Width of each bracket: 45 mm
Files included
Rear light mounting bracket model
Important
This part was designed for my own Ducati Monster 696 setup. A rear light is safety-critical road equipment. Verify the fasteners, alignment, material, vibration resistance and light visibility before every ride, and use the part at your own risk.
Follow me: roqd.one
roqd/m72