1 / 4
4 inch duct to 120mm fan adapter (inline or wall outlet)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts a 120mm fan to a 4 inch duct to be used as an inline extractor or as a wall outlet
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 100
- Makes
- 1
- Views
- 513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Standard Digital File License
This is the easiest way to extract fumes from your room or 3d printer by simply plugging it into a USB port - no klipper configuration or custom gcode needed.
Can be printed twice and placed on each side of a 120mm fan to create a cheap inline fan using 4inch ducting, or used as a wall extractor.
LINKS TO THINGS YOU MIGHT NEED| 84-108mm Clamps | To secure the ducts. Alternatively you can use duct tape |
| 4in Flexible Ducting | The main ducting used to vent the printers outside |
| M3 Self Tapping Screws | 2 Screws to secure the collector to the wall |
| 1/4 in hex shank extension | You might need extra length for your driver bit to reach |
| Duct tape | For extending ducting or as an alternative to clamps |
| Printable 4in duct bracket | I designed these to easily mount the ducting to a wall |
| Printable 2:1 collector | I designed this to merge 2 ducts into 1 |
| 120mm fan (5v) | Can plug into the usb port of a 3d printer for easy extraction |
| Fan extension cable | So you can move the fan further away from the USB port |
