Counting matching models…
Update: April 20, 2026 I added more sizes per requests. Update: February 26, 2026 Per a request, I added the 80mm version and 165mm files to this. If anyone needs any other sizes, please let me know. Thanks! I like the original design…
This adpater is designed to connect to a 4 inch flexible hose and reduce to a 2.5 inch flexible hose. The intended purpose for woodworking dust collection. The STEP file is included. Inlet Outer Diameter: 2.5 inches Outlet Outer Diameter:…
Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easer to print but don't…
The metric system is great, but sometimes you need an inch based version. These knobs are for 1/4-in and 5/16-inch bolts or nuts, and can be used in either the male or female version with the appropriate additional hardware (as shown in…
Adapter to connect a 3" duct directly to a 4" damper or any 4" duct. Inner diameter of the large end is 100mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: Any Infill: 5%…
This is a 4 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed. See also the Endcap model here: https://www.printables.com/model/637194-4in-4-inch-duct-splitter-endcap Source document:…
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
The box's internal dimensions are 4in diameter by 2in deep. 4 asymmetrical keys allow you to easily line the mold halves up and create a very positive fit, which prevents shifting in any direction. Use binder clips to hold the halves…
Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.
I needed a cover for a 4" exhaust vent and this project is the result! Features Fits 4"/100mm vent pipe Wall mount has standard 105mm screw spacing to fit a 120mm fan Flap model acts as a valve when used as an exhaust vent Modular mount…
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
Assembly instructions coming soon… (hopefully it is pretty self evident) The only part that needs supports is the “Valve”
I am getting started in 3d printing, and I only have a small 6in bed to work with. I wanted to try out a speed square, but all the files I could find ready to print were 6in or more, and wouldn't fit on my bed. So this is basically my…
Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
Fusion 360 file included (.F3D). Design aspects can be adjusted via 'parameters' in 'Parameters Table' ('MODIFY>Change Parameters'). Parameters to change are in 'Favorites' section. Imperial units used (inches), though fasteners…
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Plenty of other options out there doing the same thing. None fit my window very well. I would not use this for high temperature applications like venting air conditioners or dryers, unless you print with appropriate filaments. Designed…
I made this to adapt a 120mm fan to 100mm heat resistant duct so I can control the airflow to my smoker
This is a sand scoop with a diameter of 100 mm.(about 4 inches)The height is about 150mm. (about 6 inches) It can also be used to filter out cat poop. The material used was PETG. ADD Added 5mm hole type for cat poop shovel.
Makes easy work to adapt a 120mm fan to a dryer duct. OD is 4in Wall thickness is 2.5mm (0.1in) Print instructions Category: Household Summary Makes easy work to adapt a 120mm fan to a dryer duct. OD is 4in Wall thickness is 2.5mm (0.1in)…
I designed and printed this for my 4 gallon shop vac which had a 1 1/4in hose/nozzle (inner diameter) Print Info: No Supports No Brim (may be needed for some printers) Infill 10-20% Layer height .25mm
I couldn't find a socket holder I particularly liked that also had magnet holes in the gridfinity base, so here's mine. Holds shallow and deep 4-14mm sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of…
A 3 part case for the 2.4 inch ESP32 CYD board with a built in kickstand that folds in flat. I use this with CYD-klipper on my Lemontron 3D printer. Requires 10mm M3 screw to secure the back on and add friction to the arm. Print in the…
Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system, you simply use the cap + grommet pieces…
This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
I wanted to connect my xTool F1 to the inline exhaust system I already had in my shop. I wasn't able to locate one specifically for the F1 so I went ahead and designed and printed one. This adapter connects to the xTool F1 and allows a…
I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…
The Ocean Wave Picture Holder is ideal for showcasing a 4in X 6in beach photo or a child's first surfing success. The 4in X 6in photo can either be placed directly in the wave, or attached to the optional simple frame print and then…
If you have some unconnected 4 inch duct that needs an end cap, then this is the model for you! Slide the duct over the opening and then use a ring clamp to hold it in place.
For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…
I built an enclosure for my (6) 3d printers, but I didn't have an area to vent hot air without being blocked. I had extra dryer ducting laying around in the garage, so I designed this model to vent the air out. There are (2) different…
Updates: 26-Feb-2025 : V4 model Increased the size of the duct adapter significantly increased magnets holes from 4 to 9 added a 4in duct adapter requires about 7 in of clearance behind the printer (with duct attached) Requires about 200g…
I re-engineered the width of the vertical supports, using much less filament and added a pass through Voroni cell pattern on these - both for esthetics and filament savings. Printed with 2 walls, 4 top and bottom layers with 10% gyroid…
A sturdy remix of the stand made by Mabur specifically for the 14" MacBook M1 Pro. His license doesn't allow Remixing for some reason, although the changes I've made are pretty significant in making the stand sturdier for your expensive…
A Gridfinity socket holder for SAE/Imperial/American sized sockets. One model has “SAE” for the text, the other has a more whimsical 'MURICAN stamp, as seen in the cover photo. Holds 5/32 thru 9/16 sized sockets in 1/4in drive. I used…
This is designed to allow you to connect two 4in dust collection hoses together. I'm using Wen hose which has a reverse/clockwise spiral. None of the other designs I could find have the threads going the right way. This is still a work in…
Adapts from the backplate on the saturn 2 to 4in Duct.
4in Plastic Nose Cone Electronics Bay build This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false Designed…
dimenssions for this printer
Set of adapter to connect a 76mm (3inch) hose to a 100mm (4inch) hose. Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs.
These are storage trays for different common end mills that were designed for the Gridfinity organization system by ZackFreedman. If you want to see a video of how they work, check out my video on them: Storage Types: CNC Bit Cases (Loose…
My colleague had this plotter but the fins from one of the spool holders were cracking and finally broke off. He asked me if i could print one for him and i said yes. At first i did some search for a replacement part for the Spool Holder…
I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls…
This was an existing design I found online but it was very small. I wanted something larger to hang on my wall but as my print bed is small I had to split the model into 4 pieces. Once printed I fixed the parts together using epoxy glue,…
Print 2 of the side and 8 of the roller for one wheel. Mirror the side pieces for vectoring in the opposite direction.
I was replacing my flush valve, Kohler 1216610, found this big nut that was just over 4" across the flats. I don't have an adjustable big enough, so quick design and print to save the day. Print this strong, use at least 20% infill, more…
Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps
I printed from PETG with supports on build plate only, oriented with the round duct on the build plate. The riser is a separate piece in order to allow the ‘tail’ of the vent to be supported off the laser table at various heights,…
Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for…
I started with the original single blast gate design from Jok and resized and made some modifications. Then for added the single 4 inch intake port, (or output port depending on how you want to look at it) The 4 inch side will fit a…
Simple to print dust shoe for 65mm Spindles. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I don't have the ability to test it on all cnc routers with 65mm spindles…
This is an endcap for my 4-inch duct splitter model, found here: https://www.printables.com/model/634619-4in-4-inch-duct-splitter If you need to prevent use of one of the outlets, you can just push this piece on, and it will clip itself…
9, 15, 22.5, 30, 45 & 90 degree angle adapter able to mount to 4" Circular electrical work boxes for cameras, floodlights, etc. There is a flange part, and an adapter part. Category: Household
Connector for Chicco, Baby Hug 4in1 v4 .3mf file has two components(you can separately regulate the length you need for each side). I printed these connectors with 40% infill and the middle section with 100% infill for more strength and…
print with 4 walls and 25% infill if your printer isn't calibrated great increase size by 0.5-1.0% as i have made the ecas fitting ports tight intentionally so they are a press fit requires 5 ecas fittings i have also added mounting holes…
Holder for 14 inch laptop. You need two parts of it → print it two times. Printed without top and bottom surface, honeycomb infill.
I wanted to combine jazzychad's 4 inch duct splitter with the duct valve. There's two versions of the splitter. I also changed the knob because I didn't like splitting up the knob with the bolt. The rest should be the same but there could…
I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…
4inch dryer exhaust duct vent for wall or plywood Drill 102mm diameter hole to insert this. It might work for your heated chamber enclosure.
This is a basic adaptor to be able to use a 10cm (4inch) exhaust hose. No need for extra hardware. One part print only. This is a very basic design but it does the work very well. No need for extra tool or fitting. No need to dismantle…
Mount to the 140mm fan opening on your PC case to help exhaust the heat out in a controlled fashion, and avoid all of that extra heat during those already hot summer days. If your PC case has 140mm fan openings, you can place this vent…
changed holes for 6mm magnets added rim removed male side thicken the shell added Bridge Counterbore
This is a 4 into 1 ECAS fitting which fits into the top of the V4 toolhead. Attributing the model I used here as otherwise the licenses together prevent uploading a remix…
A din rail mount for a 4in square junction box. M5 sized holes. You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…
Description This fan had a blade break off, so I reverse engineered it in FreeCAD using point cloud data from a 3D scan using Revopoint MetroX. It's a Voltset model VS-100-4IN 4 inch inline duct fan, and their support confirmed they do…
4inch dust collection port. It looks like a cylinder, but it is slightly tapered. The dimensions of this roughly match what is built in to some of my tools that have built-in dust ports. A standard 4inch hose can fit over it, and all the…
My Dryer Vents into our attic but the hose kept fallout out of the fitting in the ceiling. So, in an effort to solve the issue, I developed this simple clamp to tie the hose to the wall. Designed for a 4 in hose.
This is a remix of the Hose Connector | Magnetic | Duct Adapter | 100mm (4 inch) designed to work with 10mm x 1.6mm magnets . I use this setup to easily switch the exhaust output between my 3D printer and my microsoldering station . The…
This adapter lets you connect a 4 inch air duct with mass produced 5.9 inch window vents. This has flanges for locking into the window vent like the normal window vent cover and even has space for the vent bird guard/bug screen to be…
A flange for 4in HVAC hose commonly found in hydroponic systems. Mounting screws are spaced to fit 120mm PC fans.
This model is a floor sweep attachment for two types of vacuum systems. The first variation is for a 4in shop dust collector using standard 4in flexible hose. The second is for a Dewalt 8 gal Shop vac. The design was inspired by other…
1/4in mount for the AMPS holes in the OSR2+ (do the SR6 and SSR also have these holes? Idk) Just press-fit a 1/4 nut to make your machine compatible with any camera mount or clamp and add bolts. SUPER rigid mount, no wobble at all! Since…
This is a test tile die that should work with most 4in ceramic wall mounted clay extruders similar to this one https://www.northstarequipment.com/Extruders.htm . I use the 2 bumps as a way to show 1 dip and 2 dips on a glaze test tile. I…
Smartphone Holder for GoPro / Actioncam mount or 1/4 inch camera tripod (in the making) thread. For phone with a width between 61mm and 87mm. Maximum depth of 10.5mm. No Support needed. Printed with 20% infill.
This case is for the Waveshare 4inch Square LCD: https://www.waveshare.com/wiki/4inch_DPI_LCD_(C) It has cutouts for a Raspberry Pi 5 but should fit other fullsize Pi models. It has openings for MicroSD card, power and USB
I designed this 4in dust pipe fitting to work in conjunction with a 6in dust pipe fitting ( link ) for mounting my pipes to the ceiling of my basement shop. Since my shop has low ceilings I needed to keep the pipe very close to the…
I needed to control the dust on my bandsaw and i didnt have a reducer for my hose. so i made a better option. This part is a direct drop in replacement for the Delta 14" bandsaw, with this print your bandsaw will now accept a 2" hose.…
Allows the XTool D1 enclosure vent hose to be used with the excellent Magnetic Quick-Disconnect system designed by Once in a Six Side
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
I needed a 4in duct fitting after installing my AC Infinity AC unit as there were no more pre installed holes. This worked great. I used 5mm brass inserts in the plate. printed with the shorter length down with supports. The nut plate…
This is a basic built to allow you to integrate an ESP32 device to monitor a "dumb" freezer and set alerts for any malfunctions before items inside the freezer spoil if they thaw by integrating into HomeAssistant via ESPHome. Wiring is…
Remixed to fit inside 4inch and 5 inch pots. Needypoo's design also had a small layer gap where the nozzle gets smaller, so I fixed that. I also added a bevel to the tip of the nozzle to make it easier to insert into tubing. I haven't…
Most things are for Husky Sockets. May work with other brands. The extension holder will most likely work with other brands.
The silver model here was printed in PLA with 0.20mm layers but 0 top and bottom layers to let the infill show thru.
A display stand for the cheap yellow esp32-2432S028 with USB-C Category: DIY
Waveshare 4inch Resistive Touch Screen for Pi cover / case
It looks like a cylinder, but one end flares out slightly. The straight end fits inside a 4inch dust collector flex hose. The end that flares out fit over a 4inch dust port on a tools (bandsaw, tablesaw, etc.). This way I can quickly move…
Custom made 4in duct flange that is pretty quick to print. Designed to be strong, and practical this is your choice for your ducting. The portion that attaches to your ducting is slightly oversized for a nice tight fit, and the base has…
A functional print I designed to fit around a 4 inch PVC pipe and be mounted to the underside of a camper trailer.
For 4in diameter rocket with 8in electronics bay. Main sled houses the RRC3, 9V battery, apple airtag, and is secured by 1/4 -20 threaded rod. Components should be secured using M3 screws. The interface rings position and hold a figertech…
This MultiGP double gate hinge. I like this one better than standard articulating hinge because you can stack gates with this piece. Made this one to fit 3/4 inch PVC. Also included a coupling for joining pieces.
Prints as 5 objects. Intended to assemble utilizing M3 and M4 screws with heat-set inserts. The slider door utilizes (optional) magnets to retain open and closed positions. !!! You will need to cut into your enclosure/tent to install !!!…
Print, pop-up, aim and fire! Target is stepped so that you can do some filament changes to give this target some life! 100mm diameter or about 4 inches. Filament Swaps First Layer is .35, rest of the layers printed at .2mm. Starting with…
Modeled a quick 4 inch (100mm) to 3 inch (75mm) reduction for dryer vent hoses. Couldn't find anything on here so I created a quick model with flares on both side for ease of use. I printed it in PETG and PETG-CF and it works great for…
holds either 42 or 44 baits, has two removable compartment covers
