1 / 5
Voltset VS-100-4IN 4 inch inline duct fan blade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reverse engineered it in FreeCAD using point cloud data scanned with Revopoint MetroX.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 121
- Makes
- 1
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Description
This fan had a blade break off, so I reverse engineered it in FreeCAD using point cloud data from a 3D scan using Revopoint MetroX. It's a Voltset model VS-100-4IN 4 inch inline duct fan, and their support confirmed they do not sell individual replacement parts, so here we are.
Printing Tips
- Print dome side up, so layers are perpendicular to normal rotational forces the blade experiences in operation
- Use brims for the thin fan blades on the bed surface
- Use standard grid supports, tree didn't seem to cover the underside supports completely, ends up being 2:1 support to part ratio 😬
- Supports take some time to remove, especially from the underside, be persistent
- Be careful removing supports from the fan blades, I used 30° overhang. It's easy to snap a blade if you leverage any way but away from the center of the part. Break the part free from the bottom first, then leverage outwards and they should snap free.
Category: Replacement Parts