FlashForge Adventurer 5M Magnetic Tool Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the standard magnets on your Adventurer 5M enclosure with tool holders.
- Rating
- 5 / 5
- Likes
- 121
- Downloads
- 611
- Makes
- 1
- Views
- 3,006
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
The standard magnet buttons on the Adventurer 5M enclosure needed an upgrade. Why not be functional as well? In order to give us better access to our most used items I have incorporated mounts into the magnets on the side of the enclosure. The glue holder and snips/cutter mount are a tight fit and will require you to push a bit on your first insertion. Two 5mm x 3mm magnets are required per mount.
Printing
Annotations are left by each model. The only thing that really needs supported is the magnet holder on the glue holder and the stylus holder. Manually paint supports on the glue holder or else auto supports will make your life difficult. The cutter/snips mount just need to be printed face down, no supports required.
Take a look at my Adventurer 5M Side Mounted Spool Holder or any of my other Adventurer 5M Add-ons while you are here.
Nozzle: .4
Filament: PLA/PETG
Layer Height: .2
Supports: Yes