Ikea lack feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To make my Ikea lack enclosure fit under a shelf above it, i had to lower it. I did this by cutting some length of the…
- Rating
- 4.952 / 5
- Likes
- 170
- Downloads
- 828
- Makes
- 24
- Views
- 4,551
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
To make my Ikea lack enclosure fit under a shelf above it, i had to lower it. I did this by cutting some length of the lower table's legs. This revealed a hollow leg that doesn't look good and could potentially scratch the floor. To fix this issue i made these table leg feet that pressure fit on the legs.
V1: This version has holes for screws.
V2: I found that V1 pressure fit to the legs and didn't need the screws, so I removed the mount.
Installation
Step 1: push the part on the table leg on a 45° angle.
Step 2: rotate the part so that the complete leg is in it, then push down to pressure fit it over the leg
Category: 3D Printer Accessories