Bit Holder 50mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bit holder for 50mm bits, with the lid to protect and secure it better.
- Rating
- 4 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 2
- Views
- 320
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
For 50 mm bits, with the snap-on-place lid to help secure and protect the bits.
I tried other models, but they always had a design flaw, to name a few:
- Lack of space to put your fingers between the bits when trying to take it out.
- Bad design of the bit hole, making it difficult for the plastic to flex and making it difficult to put the bit in and to take it out.
- Hole not tight enough to hold on to the bits.
I tried to design a smaller case, but the trade-off between space and usability wasn't good. I found one good model from @ZbynekKral. However, I had to make some changes, so I remade it from the ground up and added my idea for the snap-on place lid (nice click feel).
Pros:
- Nice click feel when closing and opening,
- You don't need screws or extra hardware to assemble it.
- Great space between the bits, so you don't have any difficulty when using your fingers to put the bits in or taking out.
Cons:
- Bigger than other models.
*CAD files available
!!! Attention !!!
The .3mf file already has the supports painted in the necessary places and the right part orientation; the lid should be printed with the text part turned to the bed and the base should be standing up.
PS: I printed in ABS, with a 0.2 mm layer height, support for ABS is optional ( I used on the lower part of the lid, not on the connection ! ) . Any other material than ABS should work, check if support is needed. If you have any problems, let me know.