1 / 5
Longboard wheel wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
wall mount for boards with wheels
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are probably many other wall mounts out there for skateboard/longboards, but I wanted to make my own to print on my old Creality CR3040 (if you Google it, look for a pic with a yellow lion inside).
It takes 2h7m to print with 0.8 nozzle at 0.32 LH on that printer above.
In BambuLab Studio for an A1 with a visually similar profile. It takes 1.5h to print on 0.2 LH, either my old printer is very slow or these new ones are very fast.
The settings I used for both are honeycomb 5% infill and no top/bottom layers.