Multiboard compatible Cable Clip

Description

This is a simple cable clip which is compatible with Multiboard. It uses the push fit connection method and is designed to blend well with the Multiboard octagonal aesthetic.

The external dimensions match the snap fittings, and it protrudes 12mm from the board.

It incorporates a 4 mm hole to allow the cable to move freely when in use, and the cable slots in from the side - This was designed with 3mm clearance which, when combined with the flex in the item allows secure holding for all round USB cables I have access to.

A second build plate holds a version with a wider slot to accommodate larger cables with less give in them. 

 The clip will function when mounted to the board in any orientation allowing you to customize your set up.

Should the cable be pulled with force, it will detach successfully from the board when paired with the regular snap (stronger snaps are available from the Multiboard parts library but I would recommend the regular one for this reason.

To mount this to a multiboard, you will either need to use an existing mounting snap, or print an extra one available here - https://than.gs/m/974295

All compatible mounting options and associated Multiboard items are available on the parts library :-https://www.multiboard.io/parts-library

Item shared in good faith following the multiboard license available here - https://www.multiboard.io/license.

This item is Designed completely in Freecad by myself, using the push fit horizontal positive .STEP file provided by the original creator Keep Making - www.Multiboard.io