Station G2 (Meshtastic or other) Antenna Mounted Weather Resistant Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case slips over an existing external high gain antenna. Weather resistant. Holds a Meshtastic Station G2 room for USB
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 68
- Makes
- 0
- Views
- 878
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case holds a B and Q Station G2 Meshtastic Node with room for a usb cord and SMA connector. There is a cover that pops over the bottom to keep bugs out. The case is water resistant and should be find in rain, snow etc. Slip it over the antenna and allow it to snug into the bottom. A short SMA to N-Type pigtail will suffice, I used a 90 degree SMA connector but a normal one should work.
Station G2: https://shop.uniteng.com/product/meshtastic-mesh-device-station-edition/
SMA to N Type Pigtail: https://www.amazon.com/dp/B08ZYK5SL9
5.8db Fiberglass External Antenna: https://www.seeedstudio.com/RF-Explorer-LoRa-Fiberglass-Antenna-Kit-902-930MHz-5-8dBi-800mm-p-5275.html
If you have a tripod you can pair this it with this print for a portable setup:
https://www.printables.com/model/1204972-tripod-quick-connect-antenna-holder-43mm-quick-rel